|
| |
HDPE Plastics Balls
High Density Polyethylene Balls
Spheres float on surface of liquid in open tank and
thereby greatly reduce the exposed liquid surface area - up to 90%. Dramatically
diminish objectionable fumes and odors. Blanket of spheres also insulates heated
liquid reducing evaporation and heat requirements. Ideal for plating tanks and
similar open tank installations where the liquid surface can be covered with a
blanket of spheres without impeding access to the tank for process purposes.
Spheres are hollow and will float on any liquid. No welt or rim on which
chemicals can deposit, and being smooth they ensure a much tighter surface
cover. Polypropylene,
non-toxic and able to withstand continuous working temperatures of 110° C (230°F)
Polypropylene is suitable for use in most known chemicals. High Density
Polyethylene generally suitable as above but with a continuous working
temperature limitation of 80° C. (176° F) softening point about 110° C (230°F).
High
density polyethylene has better chemical resistance to certain compounds
like oil, and other hydro-carbons. Also less stress cracking at low temperatures
than polypropylene. Color white translucent except 100 mm, black for outside
use. All sizes are blow molded.
| Stock
Order # |
Diameter
Inches |
Tolerance |
Solid
/ Hollow |
Balls per Pkg. |
Cost
/ Pkg. |
Buy
Now |
| KB-069 |
.125 |
±.002" |
Solid |
250 |
$31.05 |
Buy Now
|
| KB-208 |
.188 |
±.002" |
Solid |
500 |
$40.00 |
Buy Now
|
| KB-070 |
.2500 |
±.002" |
Solid |
250 |
$44.35 |
Buy Now
|
| KB-071 |
.3125 |
±.002" |
Solid |
250 |
$50.05 |
Buy Now
|
| KB-072 |
.3750 |
±.002" |
Solid |
200 |
$22.80 |
Buy Now
|
| KB-073 |
.4375 |
±.002" |
Solid |
100 |
$34.85 |
Buy Now
|
| KB-074 |
.5000 |
±.002" |
Solid |
100 |
$35.46 |
Buy Now
|
| KB-075 |
.5625 |
±.002" |
Solid |
100 |
$50.05 |
Buy Now
|
| KB-076 |
.6250 |
±.002" |
Solid |
100 |
$59.15 |
Buy Now
|
| KB-077 |
.7500 |
±.002" |
Solid |
100 |
$53.20 |
Buy Now
|
| KB-077A |
.7500 |
±.020" |
Hollow |
1000 |
$192.03 |
Buy Now
|
| KB-078 |
.8750 |
±.002" |
Solid |
100 |
$58.20 |
Buy Now
|
| KB-079 |
1.000 |
±.002" |
Solid |
50 |
$50.70 |
Buy Now
|
| KB-196 |
1.500 |
±.020" |
Hollow |
1000 |
$573.68 |
Buy Now
|
| KB-198 |
1.750 |
±.020" |
Hollow |
500 |
$459.33 |
Buy Now
|
| KB-235 |
2.000 |
±.020" |
Solid |
10 |
$457.50 |
Buy Now
|
Operating Temperature Range
-180° to +190° F
| Ball
diameter and surface coverage |
| Diameter (IN) |
Average weight
(g) |
Number per ft² |
Number per m² |
| 3/8" |
0.2 |
1,076 |
11,600 |
| 3/4" |
1.0 |
270 |
2,900 |
| 1.0" |
1.5 |
172 |
1,850 |
| 1 1/2" |
4.5 |
74 |
800 |
| 1 3/4" |
7.0 |
53 |
570 |
| 2.0" |
8.0 |
43 |
465 |
| 2.25" |
16.0 |
22 |
235 |
| 4.0" |
40.0 |
10 |
116 |
| 4.5" |
100.0 |
4.8 |
51.5 |
| The
percentage of area covered by the balls is independent of the ball
diameter, being the ratio of a circle to the hexagon which surrounds
it. This equates to 91% of the liquid surface area. The frictional
contact points ensure that each ball remains stable when subjected to
increased liquid or air turbulence. |
| Heat
and liquid loss savings |
| |
Open Surface |
1 layer 1.5"
balls |
Average Surface
Temperature oC |
90
70 50 |
90
70 50 |
Energy consumption
Kwh/h |
10.73 4.61
1.61 |
2.70 1.31
0.60 |
Percentage energy;
saving |
- -
- |
75% 71%
65% |
Evaporation
litres/m²h |
13.05 4.97
1.45 |
1.67 0.41
0.14 |
Percentage
evaporation saving |
- -
- |
87% 91%
90% |
| Test Tank
Dimensions = 600mm(W) x 1850mm(L) x 1000mm(H). |
Note: Shipping charges will apply to all orders, and
will vary depending on Customer ship to location, pricing does not reflect
shipping charges
| |
Eyebolts
Threaded Rods
Drill Bits
Set Screws
Taper Pins
Sheet
Metal Screws
Tapping
Screws
Bookmark
Us!
Circuit
Breakers
Tube Plugs
& Caps
Felt Discs, Sheets,
Strips
|
